The PP Sheet technical test was conducted at an air temperature of 72 degrees Fahrenheit with approximately 50% humidity.

Standard 4 mm Lb 150 PP corrugated and paperboard corrugated with C and Lb 250 corrugated conditions PP Sheet technical test samples. The laboratory unit of King Carton Plastic Company provides the results of technical tests based on accurate calculations performed on PP Sheet. PP Corrugated sheet sample does not contain any additives or substances such as flame retardants or anti-UV. The technical test results of Kartonplast compared to cardboard and corrugated paper are as follows:

K
Paper Corrugated PP Corrugated Sheet Features
0.15lb2.ft. 0.15lb2.ft. Weight for Test
76% 0.021% Water Absorption in 24 hrs
6lb2.ft. 46lb2.ft. Edge Crush Test
4lb2.in 81lb2.in Flat Crush Test
10gms. 1700gms. Tear Strength
200lb2.in 4,000 lb2.in Tensile Strength
32 in/lb 320 in/Ib Impact Dart Test
Not Applicable sq.Inch 174 °C Heat Det .Load @66Ibs.PerSq.Inch
1,000 cycles 21,000 cycles Living Hinge

Conclusion

The result of PP Corrugated Sheet technical test shows that the performance of PP Sheet is much better than paperboard and corrugated paper in the following conditions:

  • Water and moisture resistance
  • low weight
  • Heat resistance
  • Resistance to temperature fluctuations
  • Reusability
  • Chemical resistance
  • Rot and crush resistant
  • Electrical, sound and temperature insulation

Plastic sheet and roll variety table

The type and type of PP Corrugated sheet production are as follows:

  • PP Corrugated Sheet is available in 36 different colors.
  • PP Corrugated is produced in 2-13 mm thickness and 330-3000 gr per square meter heated.
  • PP Sheet rolls are made in 2-4 mm thickness and 330-700 gr per square meter.
  • PP Sheet can be produced in 216 cm width and without sheet length restriction.
  • The formulation of plastic sheet production can be defined to adapt to specific environmental and physical conditions.
Number Thickness Weight in grams per square meter
1 2 330
2 2 350
3 2 400
4 2 450
5 2.5 450
6 2.5 500
7 3 500
8 3 550
9 3 600
10 3 650
11 3 700
12 4 700
13 4 750
14 4 800
15 4 850
16 4 900
17 5 1000
18 5 1100
19 5 1200
20 6 1200
21 6 1400
22 6 1600
23 8 1600
24 8 1800
25 10 1800
26 10 2000
27 12 2400
28 12 2600
29 13 2800
30 13 3000

PP Corrugated Sheet in our country's growing packaging industrywe hope that not only will we bring more added value to our nation, but we will not only see deforestation and environmental degradation in terms of the use and construction of more desirable alternatives.Nowadays, the applications of Cardboard Plast in the packaging industry: making boxes and boxes, lids in agriculture and horticulture: protection of seedlings, flower beds, fruit boxes in the home appliance industry: as the back of the fridge and refrigerator, in the caraway and water cooler procedure and in the advertising industry, different types of shop stands (classroom stands), advertising stands (cutting stands) and desktop stands are not limited but are also used in many other situations.